Clone-A-Willy Easily Removable Cock Ring

Get a snug fit

With rings in the past I find that the stretch takes something away and with set sizes you don't get the fit you need. This being quite rigid in terms of stretch, will have you hard and bloated if set to the right size. Not uncomfortable on, but can be hard work to get on when at full mast without lube. Obviously when cutting down to size you can trial and error or measure, but always leave extra as you cant put it back on.

Works well when used with the Clone-A-Willy kit

I got this item free when I ordered a Clone-A-Willy kit and found it worked very well. I didn't bother with it on the first try as I have never used one before, but I found it hard to keep fully erect while setting up and using the kit. On the second attempt I made sure to use the free cock ring and was amazed how much it helped and the kit turned out great on the second attempt! I'd definitely recommend buying one at the same time as the kit if you want the best results.

Adjustable cock and ball ring

This came as a freebie with Clone-A-Willy which we have yet to do. This was my first standard cock and ball ring to be worn around both the cock and balls. It not only provides a better erection but the sensation is also pleasurable. For anyone that hasn't used a cock ring, they aren't just for those that may find it difficult to keep an erection and do provide a harder and larger erection for those without issue. It is easy to pull apart initially and is secure when put together giving a snug fit and is easy to apply to a not so easy to access area. I have not cut it down, using it under my balls and at the base of my penis. Its 2-inch diameter fits me comfortably. It was, however, difficult to get on when erect and also fairly difficult to get fingers underneath to remove so not 'Easily Removable' and does cause some discomfort. I have also had lube on my penis and hands after a session with my OH and have found it even harder to remove. Having said that the ring performs well and would be easily adjustable to just a cock ring or for a smaller diameter. Its 7-inch circumference, it suits me fine, but I may cut it slightly smaller for use with the Clone-A-Willy to provide a slightly better erection for my OH.

A must-have for cloning

I purchased one of these cock rings when my first attempt on the Clone-A-Willy wasn't so great. The Clone-A-Willy is a great product that does work and makes a great replica but it isn't as simple as it seems. It however is such a fun process to go through with your lover that I actually felt like the mistakes were worth it. On our first attempt we found out a normal cock ring wasn't to great of an idea (it got stuck in the mould and made the removal painful). This cock ring was easy to tailor to the right size and made the removal so much easier that I felt like it was way worth the money. Although we don't really feel like it stands out from other cock rings, it definitely is a great help for cloning and we will be keeping it just in case we ever decide to purchase the Clone-A-Willy with balls kit. We have only tried the ones without balls so far. It's a costly process especially when you have to buy refills and additional items such as this for the best results, but our final product definitely has us satisfied.

Too tight

I am not hung like a donkey but I do have big balls. Try as I might there was no way this was going to fit behind my balls and over my cock, even when I was flaccid. I did try stretching it but that didn't work either. The only thing I could do with it was cut it down a little and use as a cock ring. It would be nice if there was a bigger version.

Too tight

I am not hung like a donkey but I do have big balls. Try as I might there was no way this was going to fit behind my balls and over my cock, even when I was flaccid. I did try stretching it but that didn't work either. The only thing I could do with it was cut it down a little and use as a cock ring. It would be nice if there was a bigger version.

Get a snug fit

With rings in the past I find that the stretch takes something away and with set sizes you don't get the fit you need. This being quite rigid in terms of stretch will have you hard and bloated if set to the right size. Not uncomfortable on but can be hard work to get on when at full mast without lube. Obviously when cutting down to size you can trial and error or measure but always leave extra as you cant put it back on

Works well when used with the Clone-A-Willy kit

I got this item free when I ordered a Clone-A-Willy kit and found it worked very well. I didn't bother with it on the first try as I have never used one before, but I found it hard to keep fully erect while setting up and using the kit. On the second attempt I made sure to use the free cock ring and was amazed how much it helped and the kit turned out great on the second attempt! I'd definitely recommend buying one at the same time as the kit if you want the best results.

Adjustable cock ring

This item was a free addition when I bought the clone-a-willy kit. My OH and I are undecided on this product, however, I think that is more our opinion on cock rings as a whole. Therefore, I'll keep my review as objective as possible. The ring comes at quite a large size with the intention being the potential to wear over both cock and balls, or just purely cock or the balls. The design is simple and the ability to adjust this is one of the highlights to this product. As this process is not reversible, I would recommend cutting small amounts off at a time and testing the ring on. Trial and error almost. If you are in the look out for a cock ring I would say this product is worth considering due to its adaptability.

Adjustable cock and ball ring

This came as a freebie with Clone-a-Willy which we still have yet to do. This was my first standard cock and ball ring to be worn around both the cock and balls. It not only provides a better erection but the sensation is also pleasurable. For anyone that hasn't used a cock ring, they aren't just for those that may find it difficult to keep an erection but do provide a harder and larger erection for those without issue. It is easy to pull apart initially and is secure when put together giving a snug fit and is easy to apply to a not so easy to access area. I have not cut it down, using it under my balls and at the base of my penis. At it's 2 inch diameter it fits me comfortably. It was however difficult to get on when erect and also fairly difficult to get fingers underneath to remove so not 'Easily Removable' and does cause some discomfort. I have also had lube on my penis and hands after a session with my OH and have found it even harder to remove. Having said that the ring performs well and would be easily adjustable to just a cock ring or for a smaller diameter. At 7 inch circumference it suites me fine, but I may cut it slightly smaller for use with the Clone-A-Willy to provide a slightly better erection for my OH.

A must-have for cloning

I purchased one of these cock rings when my first attempt on the clone-a-willy wasn't so great. The clone-a-willy is a great product that does work and makes a great replica but it isn't as simple as it seems. It however is such a fun process to go through with your lover that I actually felt like the mistakes were worth it. On our first attempt we found out a normal c ring wasn't to great of an idea (it got stuck in the mold and made the removal painful). This c ring was easy to Taylor to the right size and made the removal so much easier that I felt like it was way worth the money. Although we don't really feel like it stands out from other c rings it Definantly is a great help for cloning and we will be keeping it just in case we ever decide to purchase the clone-a-willy with balls kit. We have only tried the ones without balls so far. It's a costly process especially when you have to buy refills and additional items such as this for the best results but our final product Definantly has us satisfied.

This could be the perfect ring for you

When choosing a cock ring it is important to get a product that best suits your needs. Some products are adjustable and therefore fairly versatile but some are intended for a very specific purpose. This cock ring has been designed for use with the Clone-A-Willy kit but it is a stand-alone product that can be used by anyone looking for this sort of item. The idea behind this cock ring is that it can be cut to size and then removed easily and quickly when worn. I was struck by how large the ring was when I first saw it but that is because it is made large enough to be worn around both the penis and testicles. However, if you would prefer to wear it around the penis only (or testicles only) then this item can be cut-to-fit. The ring fastens together with a very simple plug fitted at one end of a hollow silicone tube. The plug simply squeezes inside the opening at the other end of the tube. This design means that even when the ring is cut to a new length, there is always a new opening created because of the hollow nature of the tube. Just be sure to cut the end without the plug attached!!! I was surprised how well this simple plug worked to create a very secure joint. It required a fair amount of force to pull the ring apart once the plug was full inserted. Care should be taken not to get lube into the plug socket prior to closing the ring because naturally the ring comes apart much easier with lube in the seal. A word of caution regarding cutting the ring to size. Sounds obvious, but once it’s cut it cannot be uncut! A relatively small length cut off the end can have a big effect on the diameter, so I would recommend making very small snips at a time, literally just a couple of millimeters, until you are happy with the fit. The cock ring was not as stretchy as I would have liked. There is a small amount of elasticity but really not very much, meaning you have to get the size just right before it fits perfectly. I found that opening the cock right whilst wearing it meant getting my fingers inside of it in order to pull it apart and because the ring is not particularly stretchy I found it awkward and a little uncomfortable. A design boasting quick-release is fine but only if you can firmly pull it apart more easily. It would have been better if this product was a little more stretchy. Overall, this cock ring is a perfectly good product for someone who wants something they can trim to fit them perfectly and securely. Personally I would have preferred a little more flexibility, enabling it to be suitable for use around just the penis as well as around the testicles too. Like I said, once it’s cut it is really restricted to just that one specific area, but if that sounds like the kind of thing you are looking for then this might be the perfect cock ring for you.

Too tight

I am not hung like a donkey but I do have big balls. Try as I might there was no way this was going to fit behind my balls and over my cock, even when I was flaccid. I did try stretching it but that didn't work either. The only thing I could do with it was cut it down a little and use as a cock ring. It would be nice if there was a bigger version.

Get a snug fit

With rings in the past I find that the stretch takes something away and with set sizes you don't get the fit you need. This being quite rigid in terms of stretch will have you hard and bloated if set to the right size. Not uncomfortable on but can be hard work to get on when at full mast without lube. Obviously when cutting down to size you can trial and error or measure but always leave extra as you cant put it back on

Works well when used with the Clone-A-Willy kit

I got this item free when I ordered a Clone-A-Willy kit and found it worked very well. I didn't bother with it on the first try as I have never used one before, but I found it hard to keep fully erect while setting up and using the kit. On the second attempt I made sure to use the free cock ring and was amazed how much it helped and the kit turned out great on the second attempt! I'd definitely recommend buying one at the same time as the kit if you want the best results.

A must-have for cloning

I purchased one of these cock rings when my first attempt on the clone-a-willy wasn't so great. The clone-a-willy is a great product that does work and makes a great replica but it isn't as simple as it seems. It however is such a fun process to go through with your lover that I actually felt like the mistakes were worth it. On our first attempt we found out a normal c ring wasn't to great of an idea (it got stuck in the mold and made the removal painful). This c ring was easy to Taylor to the right size and made the removal so much easier that I felt like it was way worth the money. Although we don't really feel like it stands out from other c rings it Definantly is a great help for cloning and we will be keeping it just in case we ever decide to purchase the clone-a-willy with balls kit. We have only tried the ones without balls so far. It's a costly process especially when you have to buy refills and additional items such as this for the best results but our final product Definantly has us satisfied.

This could be the perfect ring for you

When choosing a cock ring it is important to get a product that best suits your needs. Some products are adjustable and therefore fairly versatile but some are intended for a very specific purpose. This cock ring has been designed for use with the Clone-A-Willy kit but it is a stand-alone product that can be used by anyone looking for this sort of item. The idea behind this cock ring is that it can be cut to size and then removed easily and quickly when worn. I was struck by how large the ring was when I first saw it but that is because it is made large enough to be worn around both the penis and testicles. However, if you would prefer to wear it around the penis only (or testicles only) then this item can be cut-to-fit. The ring fastens together with a very simple plug fitted at one end of a hollow silicone tube. The plug simply squeezes inside the opening at the other end of the tube. This design means that even when the ring is cut to a new length, there is always a new opening created because of the hollow nature of the tube. Just be sure to cut the end without the plug attached!!! I was surprised how well this simple plug worked to create a very secure joint. It required a fair amount of force to pull the ring apart once the plug was full inserted. Care should be taken not to get lube into the plug socket prior to closing the ring because naturally the ring comes apart much easier with lube in the seal. A word of caution regarding cutting the ring to size. Sounds obvious, but once it’s cut it cannot be uncut! A relatively small length cut off the end can have a big effect on the diameter, so I would recommend making very small snips at a time, literally just a couple of millimeters, until you are happy with the fit. The cock ring was not as stretchy as I would have liked. There is a small amount of elasticity but really not very much, meaning you have to get the size just right before it fits perfectly. I found that opening the cock right whilst wearing it meant getting my fingers inside of it in order to pull it apart and because the ring is not particularly stretchy I found it awkward and a little uncomfortable. A design boasting quick-release is fine but only if you can firmly pull it apart more easily. It would have been better if this product was a little more stretchy. Overall, this cock ring is a perfectly good product for someone who wants something they can trim to fit them perfectly and securely. Personally I would have preferred a little more flexibility, enabling it to be suitable for use around just the penis as well as around the testicles too. Like I said, once it’s cut it is really restricted to just that one specific area, but if that sounds like the kind of thing you are looking for then this might be the perfect cock ring for you.

Too tight

I am not hung like a donkey but I do have big balls. Try as I might there was no way this was going to fit behind my balls and over my cock, even when I was flaccid. I did try stretching it but that didn't work either. The only thing I could do with it was cut it down a little and use as a cock ring. It would be nice if there was a bigger version.

Get a snug fit

With rings in the past I find that the stretch takes something away and with set sizes you don't get the fit you need. This being quite rigid in terms of stretch will have you hard and bloated if set to the right size. Not uncomfortable on but can be hard work to get on when at full mast without lube. Obviously when cutting down to size you can trial and error or measure but always leave extra as you cant put it back on

Works well when used with the Clone-A-Willy kit

I got this item free when I ordered a Clone-A-Willy kit and found it worked very well. I didn't bother with it on the first try as I have never used one before, but I found it hard to keep fully erect while setting up and using the kit. On the second attempt I made sure to use the free cock ring and was amazed how much it helped and the kit turned out great on the second attempt! I'd definitely recommend buying one at the same time as the kit if you want the best results.

A must-have for cloning

I purchased one of these cock rings when my first attempt on the clone-a-willy wasn't so great. The clone-a-willy is a great product that does work and makes a great replica but it isn't as simple as it seems. It however is such a fun process to go through with your lover that I actually felt like the mistakes were worth it. On our first attempt we found out a normal c ring wasn't to great of an idea (it got stuck in the mold and made the removal painful). This c ring was easy to Taylor to the right size and made the removal so much easier that I felt like it was way worth the money. Although we don't really feel like it stands out from other c rings it Definantly is a great help for cloning and we will be keeping it just in case we ever decide to purchase the clone-a-willy with balls kit. We have only tried the ones without balls so far. It's a costly process especially when you have to buy refills and additional items such as this for the best results but our final product Definantly has us satisfied.

This could be the perfect ring for you

When choosing a cock ring it is important to get a product that best suits your needs. Some products are adjustable and therefore fairly versatile but some are intended for a very specific purpose. This cock ring has been designed for use with the Clone-A-Willy kit but it is a stand-alone product that can be used by anyone looking for this sort of item. The idea behind this cock ring is that it can be cut to size and then removed easily and quickly when worn. I was struck by how large the ring was when I first saw it but that is because it is made large enough to be worn around both the penis and testicles. However, if you would prefer to wear it around the penis only (or testicles only) then this item can be cut-to-fit. The ring fastens together with a very simple plug fitted at one end of a hollow silicone tube. The plug simply squeezes inside the opening at the other end of the tube. This design means that even when the ring is cut to a new length, there is always a new opening created because of the hollow nature of the tube. Just be sure to cut the end without the plug attached!!! I was surprised how well this simple plug worked to create a very secure joint. It required a fair amount of force to pull the ring apart once the plug was full inserted. Care should be taken not to get lube into the plug socket prior to closing the ring because naturally the ring comes apart much easier with lube in the seal. A word of caution regarding cutting the ring to size. Sounds obvious, but once it’s cut it cannot be uncut! A relatively small length cut off the end can have a big effect on the diameter, so I would recommend making very small snips at a time, literally just a couple of millimeters, until you are happy with the fit. The cock ring was not as stretchy as I would have liked. There is a small amount of elasticity but really not very much, meaning you have to get the size just right before it fits perfectly. I found that opening the cock right whilst wearing it meant getting my fingers inside of it in order to pull it apart and because the ring is not particularly stretchy I found it awkward and a little uncomfortable. A design boasting quick-release is fine but only if you can firmly pull it apart more easily. It would have been better if this product was a little more stretchy. Overall, this cock ring is a perfectly good product for someone who wants something they can trim to fit them perfectly and securely. Personally I would have preferred a little more flexibility, enabling it to be suitable for use around just the penis as well as around the testicles too. Like I said, once it’s cut it is really restricted to just that one specific area, but if that sounds like the kind of thing you are looking for then this might be the perfect cock ring for you.

Too tight

I am not hung like a donkey but I do have big balls. Try as I might there was no way this was going to fit behind my balls and over my cock, even when I was flaccid. I did try stretching it but that didn't work either. The only thing I could do with it was cut it down a little and use as a cock ring. It would be nice if there was a bigger version.

Get a snug fit

With rings in the past I find that the stretch takes something away and with set sizes you don't get the fit you need. This being quite rigid in terms of stretch will have you hard and bloated if set to the right size. Not uncomfortable on but can be hard work to get on when at full mast without lube. Obviously when cutting down to size you can trial and error or measure but always leave extra as you cant put it back on

Works well when used with the Clone-A-Willy kit

I got this item free when I ordered a Clone-A-Willy kit and found it worked very well. I didn't bother with it on the first try as I have never used one before, but I found it hard to keep fully erect while setting up and using the kit. On the second attempt I made sure to use the free cock ring and was amazed how much it helped and the kit turned out great on the second attempt! I'd definitely recommend buying one at the same time as the kit if you want the best results.

A must-have for cloning

I purchased one of these cock rings when my first attempt on the clone-a-willy wasn't so great. The clone-a-willy is a great product that does work and makes a great replica but it isn't as simple as it seems. It however is such a fun process to go through with your lover that I actually felt like the mistakes were worth it. On our first attempt we found out a normal c ring wasn't to great of an idea (it got stuck in the mold and made the removal painful). This c ring was easy to Taylor to the right size and made the removal so much easier that I felt like it was way worth the money. Although we don't really feel like it stands out from other c rings it Definantly is a great help for cloning and we will be keeping it just in case we ever decide to purchase the clone-a-willy with balls kit. We have only tried the ones without balls so far. It's a costly process especially when you have to buy refills and additional items such as this for the best results but our final product Definantly has us satisfied.

This could be the perfect ring for you

When choosing a cock ring it is important to get a product that best suits your needs. Some products are adjustable and therefore fairly versatile but some are intended for a very specific purpose. This cock ring has been designed for use with the Clone-A-Willy kit but it is a stand-alone product that can be used by anyone looking for this sort of item. The idea behind this cock ring is that it can be cut to size and then removed easily and quickly when worn. I was struck by how large the ring was when I first saw it but that is because it is made large enough to be worn around both the penis and testicles. However, if you would prefer to wear it around the penis only (or testicles only) then this item can be cut-to-fit. The ring fastens together with a very simple plug fitted at one end of a hollow silicone tube. The plug simply squeezes inside the opening at the other end of the tube. This design means that even when the ring is cut to a new length, there is always a new opening created because of the hollow nature of the tube. Just be sure to cut the end without the plug attached!!! I was surprised how well this simple plug worked to create a very secure joint. It required a fair amount of force to pull the ring apart once the plug was full inserted. Care should be taken not to get lube into the plug socket prior to closing the ring because naturally the ring comes apart much easier with lube in the seal. A word of caution regarding cutting the ring to size. Sounds obvious, but once it’s cut it cannot be uncut! A relatively small length cut off the end can have a big effect on the diameter, so I would recommend making very small snips at a time, literally just a couple of millimeters, until you are happy with the fit. The cock ring was not as stretchy as I would have liked. There is a small amount of elasticity but really not very much, meaning you have to get the size just right before it fits perfectly. I found that opening the cock right whilst wearing it meant getting my fingers inside of it in order to pull it apart and because the ring is not particularly stretchy I found it awkward and a little uncomfortable. A design boasting quick-release is fine but only if you can firmly pull it apart more easily. It would have been better if this product was a little more stretchy. Overall, this cock ring is a perfectly good product for someone who wants something they can trim to fit them perfectly and securely. Personally I would have preferred a little more flexibility, enabling it to be suitable for use around just the penis as well as around the testicles too. Like I said, once it’s cut it is really restricted to just that one specific area, but if that sounds like the kind of thing you are looking for then this might be the perfect cock ring for you.

Be

Meh

Be

Meh

Be

Meh

Easy to cut to correct

Easy to cut to correct size so you can get a good snug fit. I found it comfortable to wear and gave a really hard erection which even stayed after I had cum. Had to use a bit of lube to slip it on but no problem after that.

Easy to cut to correct

Easy to cut to correct size so you can get a good snug fit. I found it comfortable to wear and gave a really hard erection which even stayed after I had cum. Had to use a bit of lube to slip it on but no problem after that.